PISCO PNEUMATIC EQUIPMENT　About PISCO

Flow Sensor FUS20

Suction lift verification of small workpiece, which is hard to detect by pressure sensor, or flow management is possible.

- Built-in needle valve model.: →Flow adjustable needle valve and sensor are integrated into one unit.; Fuss-free plumbing and minimized installation space are realized.

Sensor as well as built-in needle valve sensor can be panel mounted.

Since coherent installation is possible, one large panel cut make possible for
mounting multiple sensors with minimum space and process.

- Dual display / 2 color indication feature.: →Introduction of main and sub display improve operability.

Additionally, 2 colors indication makes easy cognition of error.

- High accuracy, Max.±3%F.S.: →Accuracy of ±3%F.S. isrealized, and precise flow measurement is possible.

- Quick response time, Max. 50msec.: →High-speed response is realized by incorporating a platinum sensor chip; Processed with silicon micromachining.

ø2mm Push-in fitting & Tube

Best suitable for small actuator or piping in a narrow and tight space.

- Super compact.: →20% smaller than ø4mm tube fitting mini-series, PL4-□M type.

-Wide selection of configuration.: →16 different configurations being able to correspond various piping requirements.

-Only 4mm of tube bending radius.: →Tube bending radius (by JIS method) is only 4mm making compact piping possible.

SUS316 Compression Fitting

Highly corrosion resistant and suitable for industries requiring air tightness.

- Now, PISCO Polyurethane tube can be connected.: →ø8-ø16mm can be connected to straight (NSC) type and elbow (NSL) type.

- No sleeve design achieves fail-proof connection.: →It causes no mistake such as no-mounting and missing sleeve as it requires no sleeve.

- Best suitable for the piping in clean room.: →Washed and packaged in the clean room (ISO class 6 equivalent). Combination use with; PISCO cleanroom packed polyurethane tube becomes possible.

Minimal Fitting SUS303 like corrosivity

Best suitable for where small and space-saving piping is required.

- Best suitable for requiring corrosive resistance or use in chemical atmosphere.: →The fitting body is made of special stainless steel, which corrosive resistance is equivalent to SUS303.; Sealing is made of PPS, which has excellent chemical resistivity.

- Maximum 15% of downsize is achieved compared to existing Minimal fittings.
- Best suitable for an application of vacuum system by using a tube for vacuum.

Clean Wash Fitting Series

Various production processes where foreign particles and oil are not welcome.

- Vacuum Ultrasonic Cleaning.: →Deaeration package after vacuum ultrasonic cleaning by HFE (hydrofl uoroether) is; carried out in the cleanroom.

- Model variation is as same as standard line-up of each series.: →The performance and variation are equivalent to standard models.

Vacuum equipment “-S3” specification

Best suitable for applications of “no copper alloy” & “low-level ozone resistance.”

Flyer of vacuum equipment
“-S3”spec.

- Increasing number of corresponding model types.: →New ”-S3” spec. line-up.; - External vacuum controller: VXP; - Small sized built-in spring vacuum pad holders: VPMC, VPMD; - Vacuum pad mark-free series (with flexible adaptor); - Filters

Dimensions table of small sized built-in spring vacuum pad holders, VPMC, VPMD

Soft Polyurethane Tube: UC

Compact plumbing is pursued. Only clear colors are prepared.

- Best suitable for compact plumbing.: →Because of ultrasoft property, the installation to a narrow space and use requiring a small bending; radius are possible.

- Pretty 6 clear colors are prepared.: →Clear black, clear orange, clear yellow, clear green, clear blue, and clear.
- Multi-core planar tube from 2 to 6 cores is producible on demand.

Fluororesin (FEP) Tube: SET

Affordable fluororesin tube, which plays an important part in multidiscipline fields.

- Excellent cost-performance fluorine tube.: →Almost equivalent chemical resistance to Pisco's existing fluorine (PFA) tube.