FAQ
Search by keyword
Search Result for "Do Elbow type tube fittings swivel at the joint?"
Except for SUS316 Compression Fitting and All Brass Compression Fitting, almost all Elbow type PISCO tube fittings swivel at the joint.
(The joint between the thread and the fitting body allows for swiveling.)
"Swivelling" in this case means that the joint can be manually rotated to adjust the tube pull-out position after tightening the thread. If you need the tube fitting to rotate or oscillate along with the tube, use Rotary Joint or High Rotary Joint with a built-in ball bearing.
Differences between Standard type tube fittings and Rotary Joint/High-Rotary Joint
Yes, it is rotatable. After tightening the thread, you can manually rotate the resin body to adjust the tube pull-out position.
*Any tube fitting with a resin body joined by a metal part can be rotated.
*You cannot use it for continuous rotation.
A hexagon head of PH type or a hexagonal hole of POL type on each top should be tightened with a wrench or hex wrench.
For continuous rotation, please select Rotary Joint or High Rotary Joint.
The related FAQ
Search by category
Tube Fitting
Control equipment
Manual operated valve
Tube
Simple Vacuum Generator
Complex Vacuum Generator
Rotary Vacuum Pump
External Vacuum Controller
Vacuum Pad
Vacuum accessories
Solenoid Valve
Pressure Gauge / Detection switch
Air Preparation
Plarailchain
Robot accessories
Materials
Technical data
If your problem is not solved, please contact us from the following link.
You will be contacted by a representative at a later date.
If you are in a hurry or would like to contact our sales office directly by phone, please see the list of sales offices.