Pressure Gauge / Detection switch
If the pressure is not displayed on the separate display, check the following.
1)
Incorrect connection (wiring) of the connector cable
2)
Is the sensor head "analog output type"?
(Please note that the pressure indicator cannot be used with the "switch output type" sensor head.)
3)
Does the sensor type setting match the rated pressure range of the sensor head (sensor input specifications)?
Does the sensor type settings ("C-1 (compound pressure)", "C-2 (positive pressure)", "C-3 (negative pressure)") match the rated pressure range (sensor input specifications) of your sensor head ? Please check if they match. If you set a different sensor type, the correct value will not be displayed.
SED-31 sensor type setting and recommended sensor head (Reference: Excerpt from our catalog)
「C-1(compound pressure)」 VUS11-□AR
「C-2(positive pressure )」 VUS11-□A、VUS12-□A
「C-3(negative pressure)」 SEU11-□A
*)
Damaged sensor head
If a voltage higher than the power supply (V) of the sensor head and display is applied, the sensor head and display may be damaged, and as a result, the pressure may not be displayed on the pressure display. Be sure to use it within the range of the power supply (V) of the sensor head.
Search by keyword
If your problem is not solved, please contact us from the following link.
You will be contacted by a representative at a later date.
If you are in a hurry or would like to contact our sales office directly by phone, please see the list of sales offices.