Inspection (Charging)

Tube Fitting SUS316

Newly introducing Lock-claws type Push-in fitting made of SUS316.

Tube Fitting Stainless SUS316 Compression Fitting Series

Compression fitting made of SUS316, which is highly resistant to corrosion.

Tube Fitting Stainless SUS304 Series

This tube fitting serves best where strength is required or the atmosphere contains chemicals.

Tube Fitting Stainless SUS303 like Corrosivity Series

This tube fitting serves best where strength is required or corrosive atmosphere.

Minimal Fitting - Stainless SUS303 like Corrosivity Series

This ultra small barb fitting is best suitable for requiring corrosive resistance or use in chemical atmosphere where space-saving piping is required.

Tube Fitting Chemical

All-resin (PPS) made fitting, which possesses excellent heat resistance, noncombustible (UL94 V-0 equivalent) and chemical resistance and the seal is made of fluoric rubber, to meet a wide variety of applications.

Tube Fitting PP / SUS304

PP (Polypropylene) is selected for the body material and EPDM for seal material to adapt to clean environment.

Tube Fitting PP / SUS303 like Corrosivity Series

PP (Polypropylene) is selected for the body material and EPDM for seal material to adapt to clean environment.

Polyurethane Tube

Polyurethane tube for air piping and water flow.
Excellent flexibility, ideal for compact piping.
Available in 10 colors and 14 sizes. (Inch sizes available)

Soft Polyurethane Tube

Ultra soft polyurethane tube for air and water flow.
Extreme flexibility allows the installation in a narrow space where a tight bending radius is required.
Available in 6 colors and 5 sizes.

Dedicated Polyurethane Tube for Air

The Ester based polyurethane tube has achieved 20% cost saving compared to Ether based Polyurethane Tube (UB).
Featuring excellent flexibility, suitable where small bending radius is needed.
Available in 2 colors and 6 sizes.

Vacuum Tube

Excellent flexibility, ideal for piping in oscillating sections.
Ideal for compact piping requiring a small bend radius.
Available in 1 color and 5 sizes.

Fluoropolymer (PFA) Tube

Superior chemical and weather resistance makes Fluororesin Tube best suited for chemical, food-processing, medical care and semiconductor applications.
Available in 5 colors and 12 sizes. (Inch sizes available)

Fluoropolymer (FEP) Tube

Compared to our SFT tube, we successfully reduced the cost by 44% average.
Available in 5 colors and 12 sizes. (Inch sizes available)

Polyolefin tube

Made of polyolefin resin suitable for clean environments.
Suitable for application requiring sufficient flow rates compared to soft polyolefin tube.
Available in 6 colors and 8 sizes. (Inch sizes available)

Soft Polyolefin Tube

Made of polyolefin resin suitable for clean environments.
Superior flexibility compared to polyolefin tube.
Available in 6 colors and 8 sizes. (Inch sizes available)

Insert Ring

Insert Ring, inserted in a tube, prevents the tube from contracting.

Speed Control Valve SUS316 Stainless Steel

Flow control valve made of stainless steel SUS316 which has excellent anti-corrosivity

Speed Controller SUS303 like corrosivity

Best suitable for operating where strength is required or in corrosive atmosphere.

Speed Controller PP

PP (Polypropylene) is applied for the body material to adapt to clean environment.

Throttle (Needle)Valve PP

PP (Polypropylene) is applied for the body material to adapt to clean environment.

Check Valve PP with Low cracking Pressure

Check Valve PP is applicable to water (Fluid).
PP (Polypropylene) is applied for the body material to adapt to clean environment.

In-line Air Filter (-S3 Spec.)

Best suitable In-line filter for both positive and negative pressure.

Hollow Fiber Membrane Filter

By hollow fiber membrane, filtering accuracy of 0.01 μm and trapping efficiency of 99.99% are realized. Best suitable for semiconductor, measuring instruments, printing and medical industries.

Air Tank Series

Reducing pressure fluctuation and pulsation of compressed air and vacuum.

Small Pressure Sensor 12 (-S3 Spec.)

Small sized sensor of 25.4mm length x 8.5mm width

Small Pressure Sensor 11 (-S3 Spec.)

Small sized sensor of 24.5mm length x 10mm width

Small Pressure Sensor 11&12-series, Indicator for Analog output type

With use of small Pressure Sensor, a separate display system become possible.

Ball valve SUS304

Anti-corrosion ball valve is ideal for use in special environments.
Stainless steel SUS304 is used for metal parts

Ball Valve SUS316 Equivalent (10 Series)

SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
Chemical and mixed gas can be used as fluid medium.
1 piece, reduced bore type.

Ball Valve SUS316 Equivalent (30 Series)

SUS316 equivalent material (SUS316 or CF8M) for fluid contact part.
Chemical and mixed gas can be used as fluid medium.
3 pieces, full bore type.

External Vacuum Controller VJP (-S3 spec.)

Pressure adjusting function is added to conventional blow-off flow adjusting function.
It enables to prevent works from being blown away.

External Vacuum Controller VXP(-S3 spec.)

The response characteristics of supply valve is maximized to realize a high-cycle vacuum system.

External Vacuum Controller VQP (-S3 spec.)

31.5mm wide vacuum unit is designed to optimize the control of large vacuum flows.

Vacuum Generator VH・VS (-S3 Spec.)

Ejector with built-in push-in fitting for valve direct mounting type

Vacuum Generator VU (-S3 Spec.)

Conversion from compressed air to vacuum is possible in one line.

Vacuum Generator VM・VC (-S3 Spec.)

Ejector can be mounted directly to the pad holder of the vacuum pad.

Multi-function vacuum generator module VJ (-S3 spec.)

By newly adding pressure adjusting function to blow-off flow adjusting function, it enables to prevent works from being-blown away.

Multi-function vacuum generator module VX (-S3 spec.)

The response characteristics of supply valve is maximized to realize a high-cycle vacuum system.

Multi-function vacuum generator module VQ (-S3 spec.)

31.5mm wide vacuum unit is designed to optimize the control of high vacuum flows

Vacuum Filter VFU (-S3 Spec.)

Small union type Vacuum Filter.

Vacuum Regulator Push-lock type

Not only source pressure, terminal pressure can be controlled. Push-lock knob for easy adjustment.

Vacuum Pad Standard Type (-S3 spec.)

General-shape pad suitable for thick and flat work.

Vacuum Pad Standard Type (Deep-shape type) (-S3 spec.)

Deep-shape pad suitable for spherical fruits (apple, etc.) or ball.

Vacuum Pad Standard Type (Small-sized type) (-S3 spec.)

Small-sized pad suitable to semiconductor parts.

Vacuum Pad Soft Type (-S3 spec.)

Best suitable for extracting plastic products or conveying fragile work.

Vacuum Pad Soft Bellows Type (-S3 spec.)

Best suitable for extracting plastic products or conveying fragile work.

Vacuum Pad Skidproof Type (-S3 spec.)

Optimal for transporting oil-coated components, such as press parts.

Vacuum Pad Bellows Type (-S3 spec.)

Best suitable for conveying retort packaging or bags for packaged foods.

Vacuum Pad Multi-Bellows Type (-S3 spec.)

Best suitable for conveying retort packaging or bags for packaged foods.

Vacuum Pad Ultrathin Type (-S3 spec.)

Optimal for transporting thin components, such as paper, vinyl sheets.

Vacuum Pad Flat Type (-S3 spec.) / Large Suction Flow Type (-S3 spec.)

Optimal for transporting thin work pieces such as sheets or vinyl and contributing to reduce deformation and wrinkling of work pieces.

Vacuum Pad Mark-free Type (-S3 spec.)

Best suitable for transporting LCD and transportation in painting and semiconductor manufacturing process.

Vacuum Pad Sponge Type (-S3 spec.)

Best suitable for work with uneven surface such as an external wall material of building, small stone and seashell.

Vacuum Pad Oval Type (-S3 spec.)

Best suitable for substrate or long work like semiconductor.

Flexible Holder (-S3 spec.)

Suitable for the work-piece with inclined or curved surface.

Plarailchain SP

The cable carrier made of special plastic realizes less abrasive wear on cables/tubings in the carrier

Plarailchain SPO

The cable carrier (full enclosing type) made of special plastic realizes less abrasive wear on cables/tubings in the carrier

Plarailchain SC

The connecting construction (snap-together) that is free from sliding part minimizes the generation of dust

Plarailchain SD

Sturdy and durable enough even for high travel speed applications

Electrode (for coolant purpose only)

Coating and Pressing (coating, drying, calendering, slitting, winding)

Assembling (Cell assenmbly, filling, measuring, enclosing, exterior assembly)