Tube

Soft Multi-colored Ribbon Tube

RoHS2 Compliant

Offering excellent flexing. Easy for tracing and identifying the piping, suitable for piping of double-acting actuators and multiple actuators. Color:6 colors, Size:5 sizes

Bending radius

  • 6Color

Advantages

Eliminate tangling issues and enable easy tracing and troubleshooting

Extremely flexible and it is easy tracing and identifying the piping

Extremely flexible polyurethane (UC)

A cut mark is printed on the tubing every 500mm

A cuyt mark is located every 500mm as a guide. The mark is just as a guide and the accuracy is not guaranteed.

As built-to-order production, No. of cores, configuration and color are freely arranged

No. of cores :3-6 cores, Configuration :Ribbon or pyramid ,Color :10 color combination

Specifications

Fluid medium Air, Water (Conditional *1)
Max. operating pressure (65%RH at 20ºC) 0.6MPa (*2)
Max. vacuum -100kPa
Operating temperature range -15~60ºC (No freezing)
Remarks It is recommended to use Insert Ring.

Warning

*1) Adhere to the following conditions in case the fluid media is water

Surge pressure must be controlled lower than max. operating pressure when using water as a fluid medium

Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water

Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water as a fluid medium

*2) The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve. When the tubing is frequently swung and bent, there is a possibility of generating heat between molecules, and damaging the product

Port size

mm size

O.D.xI.D.(φmm) 4x2.5, 6x4, 8x5, 10x6.5, 12x8

Ordering Information

Detailed Safety Instructions

Caution

1.If there is some difficulty in peeling off the bonded tubings individually, cut a slit on the bonded part with a cutter around 5mm from the tubing end and peel them off

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.