Polyamide Tube, which satisfies the Food and Additives Standard in Japan, can be used for food processing. Color:1 color, Size:9 sizes
Suitable for piping for food process industries
Polyamide Tube, which satisfies the Food and Additives Standard in Japan
Tubings longer than the packaged length can be requested as built-to-order production
Tube color samples
Actual colors may vary due to the different display methods on your computer monitor.
|Fluid medium||Air, Water (Conditional *1), Drinking water (Conditional *1)|
|Max. operating pressure (65%RH at 20ºC)||1.5MPa (*2)|
|Operating temperature range||-15～90ºC（No freezing）|
*1) Adhere to the following conditions in case the fluid is water or any liquids
Surge pressure must be controlled lower than max. operating pressure when using water or any liquids as a fluid medium
Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water
Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water or any liquids oil as a fluid medium
*2) The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve
Type & Price list
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
Tube Fitting Stainless SUS316 Compression Fitting Series
Compression fitting made of SUS316, which is highly resistant to corrosion.
Tube Fitting Stainless SUS304 Series
This tube fitting serves best where strength is required or the atmosphere contains chemicals.
Tube Fitting Chemical
All-resin (PPS) made fitting, which possesses excellent heat resistance, noncombustible (UL94 V-0 equivalent) and chemical resistance and the seal is made of fluoric rubber, to meet a wide variety of applications.
Tube Fitting PP / SUS304
PP (Polypropylene) is selected for the body material and EPDM for seal material to adapt to clean environment.
Tube Fitting SUS316
Newly introducing Lock-claws type Push-in fitting made of SUS316.
Throttle (Needle)Valve SUS316
Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion.
Throttle (Needle)Valve PP
PP (Polypropylene) is applied for the body material to adapt to clean environment.
Insert Ring, inserted in a tube, prevents the tube from contracting.