Solenoid Valve
Solenoid Valve SVB
Standard type Solenoid Valve which is focusing on basic performance and providing good cost-performance.
Advantages
Standard type Solenoid Valve designed to place importance on basic functions.
Equipped with push & lock manual button as standard specification.
It enhances operational efficiency during maintenance work.
The body is prepared in two different colors.
Silver and light gray are available. Color choice depending on the usage environmen is possible. (Only light gray is available for 10 series. )
Equipped with individual connectors.
Top lead-out and side lead-out are available, depending on the installation environment.
Specifications
Specifications of Pilot Valve (10 Series)
| Operating system | Direct acting operation |
|---|---|
| Valve structure | Elastic seal, Poppet valve |
| Tolerance of voltage range | 21.6～26.4VDC (For 24VDC), 90～110VAC（For 100VAC) |
| Power Consumption (with LED) | 0.55W (For 24VDC)/1VA（For 100VAC) |
| Surge protection circuit | Surge absorber (24VDC), Bridge diode (For 100VAC) |
| Manual operation | Push-lock button |
| Connector lead-out direction | Connector (Straight type: Top / Elbow type: Side) |
| Operation indicator | LED |
Specifications of Pilot Valve（15, 18, 22Series）
| Operating system | Direct acting operation |
|---|---|
| Valve structure | Elastic seal, Poppet valve |
| Tolerance of voltage range | 21.6～26.4VDC (For 24VDC), 90～110VAC（For 100VAC), 99～121VAC (For 110VAC), 180～220VAC (For 200V AC),198～242VAC (For 220VAC) |
| Power Consumption (with LED) | 0.8W (For 24VDC), 1VA（For 100VAC, 1.1VA (For 110VAC), 2VA (For 200VAC), 2.2VA (For 220VAC) |
| Surge protection circuit | Surge absorber (24VDC), Bridge diode (For VAC) |
| Manual operation | Push-lock button |
| Connector lead-out direction | Connector (Straight type: Top, Elbow type: Side) |
| Operation indicator | LED |
Specifications of 10 Series Main Valve
| Fluid Medium | Air |
|---|---|
| Operating Pressure Range | 0.2～0.7MPa（SVB10S, D)/0.3～0.7MPa (SVB10A, R, P) |
| Pressure Resistance | 1.05MPa |
| Operating Temp. Range | 5～50℃ |
| Installing Direction | No Restriction (*1) |
| Operating system | Indirectly activated Pneumatic Operation by Pilot Valve |
| Port Thread Size | M5x0.8 |
| Valve Stracture | Spool Valve (Elastic Seal) |
| No. of Position | 2 positions (SVB10S, D)/ 3 positions (SVB10A, R, P) |
| No. of Port | 5-Port |
| Valve Function | Single (SVB10S)/Double (SVB10D, A, R, P) |
| Response | |
| Time (→ON) (*2) | 15msec (SVB10S)/12msec (SVB10D)/15msec (SVB10A, R, P) (*3) |
| Response | |
| Time(→OFF) (*2) | 20msec (SVB10S)/ 25msec (SVB10A, R, P) (*3) |
| Max. Operation Cycle | 5Hz |
| Min. Excitation Time | 50msec (SVB10D) |
| Lubrication | Not Required |
*1. Refer to “Warning” in “Detailed Safety Instructions”
*2. Values with 24VDC at 0.5MPa of supply.
*3. Response Time for 3-Position represents the value from neutral position to ON and from ON to neutral position (OFF).
Flow Characteristics of 10 series
| Item | Effective Sectional Area(mm2) |
|---|---|
| 1(P)→4(A), 2(B) | 3[0.16] (SVB10S, D)/2.8[0.15] (SVB10A)/2.2[0.12] (SVB10R)/4[0.22] (SVB10P)/2.2[0.12] (SVB10P at neutral position) |
| 4(A), 2(B)→5(R1), 3(R2) | 2[0.11] (SVB10S, D)/2.2[0.12] (SVB10A,P)/4[0.22] (SVB10R)/2.2[0.12] (SVB10R at neutral position ) |
* The value in [ ] is CV.
10 Series Cylinder Speed Table
| Cylinder Speed (mm/s) | Cylinder Tube bore (mm) |
|---|---|
| 100 | ～φ40 |
| 200 | ～φ32 |
| 300 | ～φ25 |
| 400 | ～φ20 |
| 500 | ～φ20 |
| 600 | ～φ20 |
| 700 | ～φ20 |
*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.
*2. The cylinder speed can vary according to the configuration of piping and fittings.
*3.The data in the above table represents the value when ø6mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB10D.
Specifications of 15 Series Main Valve
| Fluid medium | Air |
|---|---|
| Operating pressure range | 0.15～0.7MPa（SVB15S, D)/0.2～0.7MPa (SVB15A, R, P)/0.15～0.7MPa (SVB15J, L, M, M, Y, Z) |
| Pressure Resistance | 1.05MPa |
| Operating Temp. Range | 5～50℃ |
| Installing Direction | No Restriction (*1) |
| Operating system | Indirectly activated Pneumatic Operation by Pilot Valve |
| Port Thread Size | M5x0.8 (*2) |
| Valve Stracture | Spool Valve (Elastic Seal) |
| No. of Position | 2 positions (SVB15S, D, J, L, M, M, Y, Z)/3 positions (SVB15A, R, P) |
| No. of Port | 5-port (SVB15S, D, A, R, P)/3ポート (SVB15J, L, M, N, Y, Z) |
| Valve Function | Single (SVB15S, J, L, M, N)/Double (SVB15D, A, R, P, Y, Z) |
| Response | |
| Time (→ON) (*3) | 15msec (SVB15S)/12msec (SVB15D, A, R, P)/13msec (SVB15J, L, M, N)/9msec (SVB15Y, Z) |
| Response | |
| Time (→OFF) (*3) | 20msec (SVB15S)/30msec (SVB15A, R, P)/18msec (SVB15J, L, M, N) |
| Max. Operation Cycle | 5Hz |
| Min. Excitation Time | 50msec (SVB15D, Y, Z) |
| Lubrication | Not Required |
*1. Refer to “Warning” in “Detailed Safety Instructions”.
*2. SVB15J, L, and Y are valves to mount on a manifold base so that there is no thread cutting on 1(P), 5(R1) and 3(R2) ports.
*3. Values with 24VDC at 0.5MPa of supply.
Flow Characteristics of 15 Series
| Item | Effective Sectional Area (mm2) |
|---|---|
| 1(P)→4(A), 2(B) | 3.4[0.18] (SVB15S, D)/3.2[0.17] (SVB15A,R)/3.7[0.20] (SVB15P)/3.2[0.17] (SVB15P at neutral position)/3.4[0.18] (SVB15J, L, M, N, Y, Z) |
| 4(A), 2(B)→5(R1), 3(R2) | 3.2[0.17] (SVB15S,D,R,J,L,M,N,Y,Z)/3[0.16] (SVB15A,P)/3.2[0.17] (SVB15R at neutral position) |
* The value in [ ] is CV.
15 Series Cylinder Speed Table
| Cylinder Speed (mm/s) | Cylinder Tube bore (mm) |
|---|---|
| 100 | ～φ63 |
| 200 | ～φ50 |
| 300 | ～φ40 |
| 400 | ～φ40 |
| 500 | ～φ32 |
| 600 | ～φ25 |
| 700 | ～φ25 |
| 800 | ～φ20 |
*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.
*2. The cylinder speed can vary according to the configuration of piping and fittings.
*3. The data represents the value when ø6mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB15D.
Specifications of 18 Series Main Valve
| Fluid medium | Air |
|---|---|
| Operating pressure range | 0.15～0.7MPa（SVB18S, D)/0.2～0.7MPa (SVB18A, R, P)/0.15～0.7MPa (SVB18J, L, M, M, Y, Z) |
| Pressure Resistance | 1.05MPa |
| Operating Temp. Range | 5～50℃ |
| Installing Direction | No Restriction (*1) |
| Operating system | Indirectly activated Pneumatic Operation by Pilot Valve |
| Port Thread Size | Rc1/8 (*2) |
| Valve Stracture | Spool Valve (Elastic Seal) |
| No. of Position | 2 positions (SVB18S, D, J, L, M, M, Y, Z)/3 positions (SVB18A, R, P) |
| No. of Port | 5-port (SVB18S, D, A, R, P)/3-port (SVB18J, L, M, N, Y, Z) |
| Valve Function | Single (SVB18S, J, L, M, N)/Double (SVB18D, A, R, P, Y, Z) |
| Response Time (→ON) (*3) | 20msec (SVB18S)/15msec (SVB18D, A, R, P)/23msec (SVB18J, L, M, N)/14msec (SVB18Y, Z) |
| Response Time (→OFF) (*3) | 35msec (SVB18S)/50msec (SVB18A, R, P)/31msec (SVB18J, L, M, N) |
| Max. Operation Cycle | 5Hz |
| Min. Excitation Time | 50msec (SVB18D, Y, Z) |
| Lubrication | Not Required |
*1. Refer to “Warning” in “Detailed Safety Instructions”.
*2. SVB18J, L, and Y are valves to mount on a manifold base so that there is no thread cutting on 1(P), 5(R1) and 3(R2) ports.
*3. Values with 24VDC at 0.5MPa of supply.
Flow Characteristics of 18 Series
| Item | Effective Sectional Area(mm2) |
|---|---|
| 1(P)→4(A), 2(B) | 13[0.70] (SVB18S, D, P, J, L, M, N, Y, Z)/5.2[0.28] (SVB18A, R)/5.5[0.30] (SVB18P at neutral position) |
| 4(A), 2(B)→5(R1), 3(R2) | 9.5[0.51] (SVB18S, D)/4.5[0.24] (SVB18A)/14[0.76] (SVB18R)/4.5[0.24] (SVB18R at neutral position)/5[0.27] (SVB18P)/13[0.7] (SVB18J, L, M, N, Y, Z) |
*The value in [ ] is CV.
18 Series Cylinder Speed Table
| Cylinder Speed (mm/s) | Cylinder Tube bore (mm) |
|---|---|
| 100 | ～φ100 |
| 200 | ～φ80 |
| 300 | ～φ63 |
| 400 | ～φ50 |
| 500 | ～φ50 |
| 600 | ～φ40 |
| 700 | ～φ40 |
| 800 | ～φ32 |
| 900 | ～φ32 |
| 1000 | ～φ32 |
| 1100 | ～φ25 |
*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.
*2. The cylinder speed can vary according to the configuration of piping and fittings.
*3. The data represents the value when ø8mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB18D.
Specifications of 22 Series Main Valve
| Fluid medium | Air |
|---|---|
| Operating pressure range | 0.2～0.7MPa（SVB22S, D)/0.3～0.7MPa (SVB22A, R, P) |
| Pressure Resistance | 1.05MPa |
| Operating Temp. Range | 5～50℃ |
| Installing Direction | No Restriction (*1) |
| Operating system | Indirectly activated Pneumatic Operation by Pilot Valve |
| Port Thread Size | 1(P)・4(A)・2(B) Port：Rc1/4、5(R1)・3(R2) Port：Rc1/8 |
| Valve Stracture | Spool Valve (Elastic Seal) |
| No. of Position | 2positions (SVB22S, D)/3 positions (SVB22A, R, P) |
| No. of Port | 5-Port |
| Valve Function | Single (SVB22S)/Double (SVB22D, A, R, P) |
| Response Time (→ON) (*2) | 25msec (SVB22S)/18msec (SVB22D)/25msec (SVB22A, R, P) |
| Response Time (→OFF) (*2) | 40msec (SVB22S)/68msec (SVB22A, R, P) |
| Max. Operation Cycle | 5Hz |
| Min. Excitation Time | 50msec (SVB22D) |
| Lubrication | Not Required |
*1. Refer to “Warning” in “Detailed Safety Instructions”.
*2. Values with 24VDC at 0.5MPa of supply.
Flow Characteristics of 22 Series
| Item | Effective Sectional Area(mm2) |
|---|---|
| 1(P)→4(A), 2(B) | 18[0.98] (SVB22S, D)/13[0.70] (SVB22A, R)/15[0.81] (SVB22P)/9[0.49] (SVB22P at neutral position) |
| 4(A), 2(B)→5(R1), 3(R2) | 11.5[0.62] (SVB22S, D)/10[0.54] (SVB22A,P)/12[0.65] (SVB22R)/8.5[0.46] (SVB22R at neutral position) |
* The value in [ ] is CV.
22 Series Cylinder Speed Table
| Cylinder Speed (mm/s) | Cylinder Tube bore (mm) |
|---|---|
| 100 | ～φ125 |
| 200 | ～φ80 |
| 300 | ～φ80 |
| 400 | ～φ63 |
| 500 | ～φ50 |
| 600 | ～φ50 |
| 700 | ～φ40 |
| 800 | ～φ40 |
| 900 | ～φ40 |
| 1000 | ～φ32 |
| 1100 | ～φ32 |
*1. The cylinder average speed is referential at 0.5MPa of pressure, 30% of load factor and 1m of tube length.
*2. The cylinder speed can vary according to the configuration of piping and fittings.
*3. The data represents the value when ø10mm Push-In Fitting is used on 4(A) and 2(B) ports of SVB22D.
Flow Characteristic Graph
Ordering Information
Stand-alone unit, Direct Piping Type
10 Series Manifold Piping Type
Manifold
Manifold base alone
Block Plate
Detailed Safety Instructions
Caution
1.When the manual cover of the Series 10 is closed, the manual button cannot be operated manually or locked.
Frequently Asked Questions for Solenoid Valve Series
Both types indicate the valve position when the valve is unactuated. (normal position).
Normally closed type (N. C.)
Normal position is closed, covering a valve . When the valve is actuated, or electricity flows, the valve opens.
Normally open type (N. O.)
Normal position is open, uncovering a valve. When the valve is actuated, or electricity flows, the valve closes.
With the valve unactuated, the entrance leads to the exit.
Twin 3-way valve is the valve type used for our Solenoid valve SVR10 series and SVA20 series.
One valve unit mounting manifolds is incorporated two single solenoid valves of 2 positions with 3 ports, which equals to 2 pcs of 3-way valves. Saving space is possible by that.
Two 3-way valves built in one valve unit can be controlled separately. N.C. (Normally closed) or N. O. can be also selectable for the each valve unit.
▼Twin 3-way valve video
Control of main valve in SVA20 series is carried out by air operation with the pilot valve, thus P (supply) port of the manifold requires 0.2～0.7MPa air supply. In case of 5-valve and twin 3-way valve, the supply air pressure for this P port is output at A or B port of each mounted valve.
Compressed air and vacuum corresponding 2- and 3-ports valves uses air for P (supply) port to operate the pilot valves and vacuum or compressed air circuit to be controlled are connected to A or B port of the mounted valve. When connecting, B port should be connected to air supply side, and A port should be air exhaust side (actuator side).
Even when different types of valves are mounted at the same time, there is no need to connect external pilot air, so that no wiring and saving space are realized.
Operating pressure range is -0.1～0.7MPa,
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
