Robot Accessories
EOAT (End of Arm Tooling) Direct Mountable Material Handling Vacuum Generator VYR
Vacuum Generator with blow-off function which can be mounted directly to EOAT.
Advantages
Vacuum Generator with blow-off function which can be mounted directly to EOAT.
Can be mounted directly to EOAT with P.C.D. 31.5.
Small and short type.
Nozzle bore 0.5mm & 0.7mm type: Height 20mm, Nozzle bore 1.0mm & 1.2mm type: Height 28mm
Blow-off function is equipped as standard.
Blow-off is possible without blow-off piping. Blow-off flow rate and time can be adjusted with attached needle.
Realized a high speed suction / blow-off cycle.
Exhaust noises are below 75dB[A].
Nozzle bore 0.5mm & 0.7mm type: below 65dB[A], Nozzle bore 1.0mm & 1.2mm type: below 75dB[A]. (by our factory simple measurement)
Max. 4 vacuum ports are available for nozzle bore 0.5mm & 0.7mm type.
Pressure sensor can be installed. (Max. 3 ports after pressure sensor installed.)
Max. 2 vacuum ports are available for nozzle bore 1.0mm & 1.2mm type.
Pressure sensor mounting port is prepared.
Built-in blow-off air storage chamber.
Nozzle bore 0.5mm & 0.7mm type: 0.404mL, Nozzle bore 1.0mm & 1.2mm type: 0.615mL
Storage capacity of blow-off air is expandable.
Extra storage chamber of blow-off air can be added by connecting a tubing with a plug cap. (Only for nozzle bore of 1.0mm & 1.2mm type.)
Port size
Vacuum port tube dia. (Nozzle bore: 0.5mm, 0.7mm)
| mm size(mm) | φ3mm, φ4mm, φ6mm |
|---|
Vacuum port tube dia. (Nozzle bore: 1.0mm, 1.2mm)
| mm size(mm) | φ4mm, φ6mm, φ8mm |
|---|
Air supply port size
| mm size(mm) | φ4mm, φ6mm |
|---|
Ordering Information
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
