Unique Features of PISCO Vacuum Grippers

The suction stroke can be changed with a spacer. Features of the VRG vacuum gripper, such as reduced suction marks on bagged workpieces, are explained.

For Those Concerned About Suction Marks – Surface Treatment Solutions!

The use of pads with surface treatment reduces suction marks left on the workpiece during suction transfer.

Never Overlook Rubber Fragment Contamination in Production Lines!

Introducing Vacuum Pad Metal Detectable Type with metal powder infusion. Prevents contaminated products from reaching distribution by enabling early detection.

Features of Pre-set Pressure Regulator

Examples including man-hour reductions and air consumption reductions when used in manifolds are explained.

Energy-saving Improvement by Switching from a Vacuum Generator to a Vacuum Pump

Our vacuum pumps are expected to improve production efficiency due to stable suction. Additionally, they are very quiet, contributing to an improved working environment.

Suction and Transport of Bagged Workpieces Made Possible!

Stable suction transport is possible for both soft packaging bags filled with liquid and hard packaging bags, thanks to two types of lip hardness.

Reduction of Work Time for Pipe Installation with flareless Tube Fittings

No flare is required, reducing the man-hours required for piping.

Control Multiple Vacuum Pads with a Single Vacuum Source

With the Fall Prevention Valve, a single vacuum generator can control multiple vacuum pads. Even if there is an unattached pad, other workpieces will not be dropped.

Color Caps for Clear Piping Identification

Matching the color of the tube and release ring of push-in fitting prevents piping errors.

Cycle Time Reduction in Automated Machining Processes

The use of the speed controller with two-stage adjustment of cylinder speed increases the speed of door opening and closing and shortens the cycle time of the machining process.

Condensation Prevention for Small Cylinders Using EQJ

Release moisture in small actuators caused by adiabatic expansion to the atmosphere.

Preventing Oil Ingress into Valves from ATC Shutter Air Cylinders

Oil is discharged through the quick exhaust valve, preventing it from flowing into the valve.

Reducing Work Time for Machine Tool Spindle Air Purge

The introduction of fixed-orifice fittings makes scale air purge simple and efficient.

All-Plastic Body – Ideal for High-Humidity Factory Piping!

All-plastic Chemical fittings are ideal for high-humidity factory piping.

Industrial Machinery

Industrial Robot (FA)

Rechargeable battery

Semiconductor, Solar Cell, Secondary Battery and Physical/Chemical Industries

Food, Medicine and Packaging Machinery

Molds and Molding Machinery