Control Valve
Speed Controller Large-Flow type
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder.
Advantages
Large-flow type Speed Controller for driving device. Best suitable for high-speed operation cylinder.
Large-Flow type with same size as Speed Controller series.
Specifications
Fluid medium | Air |
---|---|
Operating pressure range | 0.1~0.7MPa |
Check valve opening pressure | 0.05MPa |
Operating temp. range | 0~60℃ (No freezing) |
Port size
Tube dia.
mm size(mm) | φ6, φ8, φ10, φ12 |
---|---|
inch size | φ1/4, φ3/8 |
Thread size
Taper pipe male thread | R1/8, R1/4, R3/8, R1/2 |
---|---|
NPT Thread | NPT1/8, NPT1/4, NPT3/8 |
Flow Characteristic Graph
Type & Price list
Detailed Safety Instructions
Warning
1.To adjust the speed of the actuator, gradually turn the needle from the fully closed position to increase the air volume. If the needle is open, there is a risk of the actuator move suddenly and violently. Turning the needle clockwise closes the valve, while turning it counter-clockwise opens it.
2.When adjusting the flow rate of the equipment, the needle should be turned to open gradually from the fully closed position. If the needle is in open position, a high flow rate will be instantly applied to the equipment and there is a risk of damage to it.
Caution
1.Leakage is allowed for the control flow even when the needle is fully closed position and should not be used in such a way that zero leakage is required.
2.Since this product is designed to give priority to securing a large flow rate, if it is used in such a way that surge pressure is applied in the control flow direction, depending on the conditions, the diaphragm may turn-up and the control function may be lost.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.