Control Valve
Speed Controller Low-Flow type
Low-flow type Speed Controller for driving device. Best suitable for the fine speed adjustments of low-speed cylinders.
Options
-
Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
Advantages
Low-flow type Speed Controller for driving device. Best suitable for the fine speed adjustments of low-speed cylinders.
Precise control for low speed cylinder.
Free flow rates are equivalent to those of standard products. Return strokes can be driven at high speed.
Specifications
Fluid medium | Air |
---|---|
Operating pressure range | 0.1~0.9MPa |
Check valve opening pressure | 0.05MPa |
Operating temp. range | 0~60℃ (No freezing) |
Port size
Tube dia.
mm size(mm) | φ1.8, φ2, φ3, φ4, φ6, φ8, φ10 |
---|
Thread size
Metric male thread | M3x0.5, M5x0.8 |
---|---|
Taper pipe male thread | R1/8, R1/4 |
Flow Characteristic Graph
Type & Price list
Detailed Safety Instructions
Warning
1.To adjust the speed of the actuator, gradually turn the needle from the fully closed position to increase the air volume. If the needle is open, there is a risk of the actuator move suddenly and violently. Turning the needle clockwise closes the valve, while turning it counter-clockwise opens it.
2.When adjusting the flow rate of the equipment, the needle should be turned to open gradually from the fully closed position. If the needle is in open position, a high flow rate will be instantly applied to the equipment and there is a risk of damage to it.
3.After the threaded body is tightened, the resin body must be rotated in a clockwise direction when adjusting the tube fitting port position, as the screws may loosen.
Caution
1.Leakage is allowed for the control flow even when the needle is fully closed position and should not be used in such a way that zero leakage is required.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.