Control Valve
Speed Control Valve SUS316 Stainless Steel
Flow control valve made of stainless steel SUS316 which has excellent anti-corrosivity
-
No copper-based metallic material is used in flow paths
-
HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
-
No lubrication is used during assembly.
-
Fluorine grease is used as grease, and the product is packaged in a clean room after cleaning with clean air.
Advantages
Flow control valve made of stainless steel SUS316 which has excellent anti-corrosivity
External parts are made of SUS316 that has excellent anti-corrosive characteristics
The material of sealing rubber is FKM (One of diaphragm is HNBR)
The same lock-claws system as tube fitting is adopted
Disconnecting tubing is easier now
All the models come with the oil-free specification
External parts are Food Sanitation Law compliant
Specifications
Fluid medium | Air |
---|---|
Operating pressure range | 0.1~0.9MPa |
Operating temperature range | -5~60℃ (No freezing) |
Valve seat cracking pressure | 0.05MPa |
Port size
Tube dia.
Metric size (mm) | φ4, φ6, φ8, φ10, φ12, φ16 |
---|
Thread size
Metric male thread | M5x0.8 |
---|---|
Taper pipe male thread | R1/8, R1/4, R3/8, R1/2 |
Flow Characteristic Graph
Construction
Type & Price list
Detailed Safety Instructions
Warning
1.When setting the speed of actuators, open the air gradually by turning the needle from the fully-closed position. Otherwise, the actuators can pop or cause unplanned movements. Turn the needle clockwise to close and ounterclockwise to open.
2.When adjusting the flow rate in the equipment, open the air gradually by turning the needle from the fully-closed position. Otherwise, the actuators can pop or cause unplanned movements. Turn the needle clockwise to close and ounterclockwise to open.
2.As no Sealock (thread sealant) is coated on taper thread, be careful with the installation. When applying sealing tape or agent on the thread, wrap or apply it leaving 1.5 to 2 thread ridges from the tip of the thread unapplied.
3.The corrosivity and dust emission depend on the operating environment. If there is concern about adverse effects on the machinery or the equipment, evaluate the adoption of the product in advance in accordance with the operating conditions.
4.The material of the retainer is PBT, the diaphragm is HNBR and the core cylinder is special stainless steel (Austenitic or Ferritic). Do not use the product in case there is any concern for the materials.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.