Tube
Vacuum Tubing
Excellent flexibility, ideal for piping in oscillating sections.
Ideal for compact piping requiring a small bend radius.
Available in 1 color and 5 sizes.
Bending radius
-
1Color
Advantages
Very soft and flexible suitable for piping of moving parts
Suitable for applications where maneuverability or small bend radisu is required
A cut mark is printed on the tubing every 500mm
Cutting marks are printed at approximately 500mm intervals
Tube overview
Tube color samples
Actual colors may vary due to the different display methods on your computer monitor.
Specifications
UD0425, UD0640
| Fluid medium | Air |
|---|---|
| Max. operating pressure (65%RH at 20ºC) | 0.4MPa *1 |
| Max. vacuum | -100kPa |
| Operating temperature range | -15～50ºC (No freezing) |
Warning
*1. The value of max. operating pressure is measured at 20℃ and 65% RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve. When the tubing is frequently swung and bent, there is a possibility of generating heat between molecules and damaging the product.
*Be sure to place Insert Ring into the tubing end when Vacuum Tube is inserted into Push-In Fittings. There is a possibility that the tubing may fall off without using Insert Ring.
UD0860, UD1075, UD1290
| Fluid media | Air |
|---|---|
| Max. operating pressure (at 20ºC 65%RH) | 0.3MPa (*1) |
| Max. vacuum | -100kPa |
| Operating temperature range | -15～50ºC (No freezing) |
Warning
*The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve. When the tubing is frequently swung and bent, there is a possibility of generating heat between molecules, and damaging the product.
*Be sure to place Insert Ring into the tubing edge when the tubing is inserted into Push-in Fitting with water as a fluid medium.
Port size
Metric size
| O.D.xI.D.(φmm) | 4x2.5, 6x4, 8x6, 10x7.5, 12x9 |
|---|
Type & Price list
Detailed Safety Instructions
Caution
1.Load is not considered in the value of Minimum Installation Radius. Since Vacuum Tube is easily crushed during vacuum suction, an enough margin of Minimum Installation Radius needs to be applied. (Reference for Margin；Minimum Installation Radius x 1.3)
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
