Tube
Anti-spatter Tubing
Best suitable for environments where sparks are generated as the tube is covered with flame-retardant cover (V-0 equivalent) and has excellent spatter resistance.
Available in 1 color and 8 sizes.
Bending radius
-
1Color
Advantages
Made of self-extinguishing PVC for the outer cover and Soft Nylon Tube (NB) for the inner tube.
The stripping length of the cover for PISCO Tube Fitting Anti-spatter series and Brass series is printed on the tube.
By using Tube Stripper for Anti-spatter Tube (TSC), the cover can be peeled without damaging the inner tube. *The cut mark is only a guide and does not guarantee the dimension.
Can also be used with hot water and heat medium oil.
Cover color changes are available as special-order products. (For orders of 500 m or more, the color can be changed to red, blue, green, yellow, or white.)
Tube overview
Tube color samples
Actual colors may vary due to the different display methods on your computer monitor.
Specifications
| Fluid medium | Air, Thermal oil, (Conditional *1), Water (Conditional *1) |
|---|---|
| Max. operating pressure (65%RH at 20ºC) | 1.0MPa *2 |
| Max. vacuum | -100kPa |
| Operating temperature range | -15 to 90ºC (No freezing) |
Warning
*1. The following conditions must be observed when the fluid medium is water or heat medium oil.
Surge pressure must be controlled lower than max. operating pressure when using water or heat medium oil as a fluid medium.
General tap water in Japan, free from foreign substances or contamination, can be used. Carry out the evaluation under an actual operating condition for using other kind of water.
Be sure to place Insert Ring (WR) into the tube edge when tube is inserted into push-in fittings and using water or heat medium oil as a fluid medium.
*2. The value of max. operating pressure is measured at 20ºC and 65% RH. For other temperatures, the Burst Pressure Curve should be used with a sufficient safety margin.
Port size
Metric size
| O.D. x I.D. (φmm) | 4x2.5, 6x4, 8x6, 10x7.5, 12x9 |
|---|
| O.D. x I.D. (φin) | 1/4x0.180, 3/8x0.275, 1/2x0.376 |
|---|
*) Metric size 4x2.5 can be used as inch size 5/32x0.098, and metric size 8x6 as inch size 5/16x0.236.
Type & Price list
mm size
Inch size
Detailed Safety Instructions
Caution
1.Due to the nature of the products, some blooming of additives may appear on the surface of tubing as time passes
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
