Tube
Polyolefin Tubing
Made of polyolefin resin suitable for clean environments.
Suitable for application requiring sufficient flow rates compared to soft polyolefin tubing.
Available in 6 colors and 8 sizes. (Inch sizes available)
Bending radius
-
6Color
Advantages
Suitable for clean environment and requiring sufficient flow rate
Suitable for application requiring sufficient flow rate under clean environment
Made of polyolefin resin suitable for clean environments.
Superior water resistance
Tubing color comes in 6 colors
Cleanroom wash/packaging is available
Cleaning and packing in cleanroom ISO class 6 equivalent.
Tube overview
Tube color samples
Actual colors may vary due to the different display methods on your computer monitor.
Specifications
Fluid medium | Air, Water (Conditional *1), Others such as chemicals (Conditional *1) |
---|---|
Max. operating pressure (65%RH at 20º) | 1.0MPa *2 |
Max. vacuum | -100kPa |
Operating temperature range | -15~80ºC (No freezing) |
Warning
*1. Adhere to the following conditions in case the fluid is water or any liquids.
Surge pressure must be controlled lower than max. operating pressure when using water or any liquids as a fluid medium.
Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water.
Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water or any liquids oil as a fluid medium.
In case of using with water, the tubing can be discolored but it does not affect the performance of tubing.
Can be used with numerous chemicals but please check the chemical compatibility before use.
*2. The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve.
Fluid medium | Air, Water (Conditional *1), Others such as chemicals (Conditional *1) |
---|---|
Max. operating pressure (65%RH at 20º) | 0.7MPa (*2) |
Max. vacuum | -100kPa |
Operating temperature range | -15~80ºC (No freezing) |
Warning
*1. Adhere to the following conditions in case the fluid is water or any liquids.
Surge pressure must be controlled lower than max. operating pressure when using water or any liquids as a fluid medium.
Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water.
Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water or any liquids oil as a fluid medium.
In case of using with water, the tubing can be discolored but it does not affect the performance of tubing.
Can be used with numerous chemicals but please check the chemical compatibility before use.
*2. The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve.
Port size
Inch size
O.D.xI.D.(φin) | 1/4x0.180, 3/8x0.275, 1/2x3/8 |
---|
Metric size
O.D.xI.D.(φmm) | 4x2.5, 6x4, 8x6, 10x7.5, 12x9 |
---|
*4mm O.D.(4x2.5) is the same as 5/32" O.D.(5/32x0.098), 8mm O.D.(8x6) is 5/16" O.D.(5/16x0.236) as well.
Type & Price list
mm size
Inch size
Detailed Safety Instructions
Warning
1.In case of using with chemicals, solvents or mixed gases, please check the chemical compatibility before use. Incorrect use could result in breakdown of fittings, fluid leakage or tubing falling off
2.Since this product has low hardness and the surface is easily scratched, press down on the release-ring of the push-in fitting when installing.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.