Vacuum Generator, Unitasking
Vacuum Generator VRL
Carries small, irregularly shaped workpieces such as particles, powders, and fibers
Advantages
Carries small, irregularly shaped workpieces such as particles, powders, and fibers
The suction port and the exhaust port are located in straight line which make it possible to carry works in one line.
The works are sucked in from the suction port and pass through the inside of vacuum generator, which enables conveyance of works through a tube.
An optimal vacuum generator can be selected according to the work size.
Specifications
| Fluid medium | Air, inert gas |
|---|---|
| Operating pressure range | 0～0.9MPa |
| Rated supply pressure | 0.5MPa |
| Operating temp. range | 0～60℃(No freezing) |
Port size
Vacuum port
Tube dia.
| mm Size (mm) | φ6, φ8, φ10, φ12, φ16 |
|---|
Thread size
| Taper thread (male) | R1/8, R1/4, R3/8, R1/2 |
|---|
Air supply port
Tube dia.
| mm Size (mm) | φ6, φ8, φ10 |
|---|
Thread size
| Taper thread (male) | R1/8, R1/4 |
|---|
Exhaust port
Tube dia.
| mm Size (mm) | φ8, φ12, φ16 |
|---|
Thread size
| Taper thread (male) | R1/8, R1/4, R1/2 |
|---|
Vacuum Characteristic Graph
Construction
Type & Price list
Detailed Safety Instructions
Caution
1.Granules, powders, fibers etc. may not be conveyed by the vacuum generator VRL under certain conditions. Contact PISCO for further information.
2.If the exhaust port is a push-in fitting for a tube O.D. ø 16 mm, please use a tube with an internal diameter of ø 12 mm or larger.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
