Vacuum Pad
Vacuum Suction Cup Flat Type (-S3 spec.) / Large Suction Flow Type (-S3 spec.)
Optimal for transporting thin work pieces such as sheets or vinyl and contributing to reduce deformation and wrinkling of work pieces.
-
No copper-based metallic material is used in flow paths
-
HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.
Advantages
Optimal for transporting thin work pieces such as sheets or vinyl and contributing to reduce deformation and wrinkling of work pieces.
Groove on a flat pad reduces deformation and wrinkle on a work-piece.
Wide selection of pad sizes, materials and holder types.
Stroke length of spring type holder can be selected.
Conventional long stroke holder (with cover) is integrated into VPC or VPD.
Stroke:6, 10, 15 and 20mm
Conventional long stroke holder (without cover) is renewed as VPOC or VPOD.
Stroke:20, 30, 40 and 50mm
The pad holder requiring for applications of "No copper alloy" and "Low-level ozone resistance" is available.
-S3 spec.:Non copper alloy is used for metal parts and HNBR or FKM is used for seal materials.
Large Suction Flow type has a significantly improved suction flow and suction force thanks to additional flow holes.
DLC. coating type uses a special coating on the surface of the vacuum pad to prevent sticking to the workpiece.
DLC. coating type significantly improves slipperiness. Effective in reducing adsorption marks and preventing sticking of lightweight and thin workpieces.
Pad surface treatment for minimizing suction marks on workpieces is available as an option.
Large suction flow type with significantly improved suction power is also available
Specifications
Pad material
Material | Silicone rubber, Urethane rubber, Fluoro rubber, Conductive silicone rubber |
---|
Holder type
Fixed type, Top port | VPA(Standard) |
---|---|
Fixed type, Side port | VPMB(Mini)/VPB(Standard) |
Spring type, Top port | VPC(Standard) |
Spring type, Side port | VPMD(Mini)/VPD(Standard) |
Spring type, Direct mount | VPF |
Port size
Pad size(mm)
φ10, φ15, φ20, φ25, φ30 |
---|
Port tube dia.
Push-in fitting (mm) | φ4, φ6 |
---|---|
Barb fitting (tube O.D. x I.D. (mm) | φ3×φ2, φ4×φ2.5, φ6×φ4 |
Port thread size
Metric female thread | M5×0.8, M6×1 |
---|---|
Male thread | M14×1 |
Theoretical Suction Force Graph
Ordering Information
Model designation (example)
Detailed Safety Instructions
Caution
1.When selecting a product, pay attention to the following points and perform the suction test on the actual application. (1) Workpieces that are porous, breathable or easily deformed by their own weight during suction may be difficult to pick up and transport.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.