Vacuum Pad

Vacuum Suction Cup Sponge Type

RoHS2 Compliant

Best suitable for work with uneven surface such as an external wall material of building, small stone and seashell.


  • No copper-based metallic material is used in flow paths
  • HNBR or FKM is used for the seal rubber material. *Some products are only compatible in the flow path.


Best suitable for work like an external wall material of building, small stone and seashell.

Best suitable for work-piece with rough and uneven surface like an external wall material of building, small stone and seashell.

Wide selection of pad sizes and holder types.

Pad size:9sizes.
Holder type:11types.

Silicone rubber with high mechanical strength, abrasion resistance and durability is available as a pad material.

With its high density, silicone rubber suppresses a distortion of a pad by compression.
Compliant to standards and criteria for food and food additives (Notification No. 370 of Japan's Ministry of Health and Welfare).
Best suitable for suction conveyance of food-related work-piece.

Stroke length of spring type holder can be selected.

Conventional long stroke holder (with cover) is integrated into VPC or VPD.
Stroke:6, 10, 15 and 20mm

Conventional long stroke holder (without cover) is renewed as VPOC or VPOD.
Stroke:20, 30, 40 and 50mm

Low dust emission type is newly introduced for spring type holder.

Lower dust emission compared to conventional spring type holder.

Noise level:Realizing low noise with 45dB.

Connectable pad size:φ10~φ50mm

Stroke:5, 10, 15mm are available.

The pad holder requiring for applications of "No copper alloy" and "Low-level ozone resistance" is available.

-S3 spec.:Non copper alloy is used for metal parts and HNBR or FKM is used for seal materials.


Pad material

Material Chloroprene rubber, Silicone rubber

Holder type

Fixed type, Top port VPMA(Mini)/VPA(Standard)
Fixed type, Side port VPMB(Mini)/VPB(Standard)
Spring type, Top port VPMC(Mini)/VPC(Standard)/VPOC(No cover)/VPLFC(Low dust emission)
Spring type, Side port VPMD(Mini)/VPD(Standard)/VPOD(No cover)
Spring type, Direct mount VPF

Port size

Pad size(mm)

φ10, φ15, φ20, φ25, φ30, φ35, φ50, φ70, φ100

Port tube dia.

Push-in fitting(mm) φ1.8, φ2, φ3, φ4, φ6, φ8
Barb fitting (Tube O.D.xI.D.)(mm) φ3xφ2, φ4xφ2.5, φ6xφ4

Port thread size

Metric female thread M5x0.8, M6x1
Parallel pipe female thread G1/8
Male thread M14x1

Theoretical Suction Force Graph

Type & Price list

The followings are list of the most common models.
For other models, please refer to Vacuum Pad Model Code Search or the digital catalog.

Pad rubber only, Pad & Screw set

Pad+Holder (Fixed type) set

Pad+Holder (Spring type) set

Detailed Safety Instructions


1.When replacing pads with a diameter of ø10 to ø30 mm, tighten the pads by hand securely until they butt against the end face. Also, when installing the pad frame, tighten it with a torque of 0.45 to 0.55 Nm using an appropriate tool, and make sure there is no loosening.

Inquiries about this product

It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.

The following are frequently asked questions. Please check before making inquiries.